GE Multilin L60, Инструкция по эксплуатации

Страница: 615 / 752

GE Multilin L60 Line Phase Comparison System B-51
APPENDIX B B.4 MEMORY MAPPING
B
9904 FlexElement 3 Actual
-2147483.647 to 2147483.647
--- 0.001 F004 0
9906 FlexElement 4 Actual -2147483.647 to 2147483.647 --- 0.001 F004 0
9908 FlexElement 5 Actual -2147483.647 to 2147483.647 --- 0.001 F004 0
990A FlexElement 6 Actual -2147483.647 to 2147483.647 --- 0.001 F004 0
990C FlexElement 7 Actual
-2147483.647 to 2147483.647
--- 0.001 F004 0
990E FlexElement 8 Actual -2147483.647 to 2147483.647 --- 0.001 F004 0
Teleprotection Inputs/Outputs Commands (Read/Write Command)
9980 Teleprotection Clear Lost Packets 0 to 1 --- 1 F126 0 (No)
Teleprotection Inputs/Outputs (Read/Write Settings)
9990 Teleprotection Function 0 to 1 --- 1 F102 0 (Disabled)
9991 Teleprotection Number of Terminals 2 to 3 --- 1 F001 2
9992 Teleprotection Number of Channels 1 to 2 --- 1 F001 1
9993 Teleprotection Local Relay ID 0 to 255 --- 1 F001 0
9994 Teleprotection Terminal 1 ID 0 to 255 --- 1 F001 0
9995 Teleprotection Terminal 2 ID 0 to 255 --- 1 F001 0
9996 Reserved (10 items) 0 to 1 --- --- F001 0
9A00 Teleprotection Input 1-n Default States (16 items) 0 to 3 --- 1 F086 0 (Off)
9A10 Teleprotection Input 2-n Default States (16 items) 0 to 3 --- 1 F086 0 (Off)
9A20 Teleprotection Output 1-n Operand (16 items) 0 to 4294967295 --- 1 F300 0
9A40 Teleprotection Output 2-n Operand (16 items) 0 to 4294967295 --- 1 F300 0
Teleprotection Channel Tests (Read Only)
9AA0 Teleprotection Channel 1 Status 0 to 2 --- 1 F134 1 (OK)
9AA1 Teleprotection Channel 1 Number of Lost Packets 0 to 65535 --- 1 F001 0
9AA2 Teleprotection Channel 2 Status 0 to 2 --- 1 F134 1 (OK)
9AA3 Teleprotection Channel 2 Number of Lost Packets 0 to 65535 --- 1 F001 0
9AA4 Teleprotection Network Status 0 to 2 --- 1 F134 2 (n/a)
9AAF Teleprotection Channel 1 Input States 0 to 1 --- 1 F500 0
9AB0 Teleprotection Channel 2 Input States 0 to 1 --- 1 F500 0
9AC0 Teleprotection Input 1 States, 1 per register (16 items) 0 to 1 --- 1 F108 0 (Off)
9AD0 Teleprotection Input 2 States, 1 per register (16 items) 0 to 1 --- 1 F108 0 (Off)
Charge Current Compensation Settings (Read/Write)
9EF0 Charging current compensation factor 0 to 1 --- 1 F102 0 (Disabled)
9EF1 Charging current compensation block 0 to 4294967295 --- 1 F300 0
9EF3 Charging current compensation positive-sequence Xc 0.100 to 65.535 kohms 0.001 F001 100
9EF4 Charging current compensation zero-sequence Xc 0.100 to 65.535 kohms 0.001 F001 100
Permissive Overreach Transfer Trip (POTT) Settings (Read/Write)
A070 POTT Scheme Function 0 to 1 --- 1 F102 0 (Disabled)
A071 POTT Permissive Echo 0 to 1 --- 1 F102 0 (Disabled)
A072 POTT Rx Pickup Delay 0 to 65.535 s 0.001 F001 0
A073 POTT Transient Block Pickup Delay 0 to 65.535 s 0.001 F001 20
A074 POTT Transient Block Reset Delay 0 to 65.535 s 0.001 F001 90
A075 POTT Echo Duration 0 to 65.535 s 0.001 F001 100
A076 POTT Line End Open Pickup Delay 0 to 65.535 s 0.001 F001 50
A077 POTT Seal In Delay 0 to 65.535 s 0.001 F001 400
A078 POTT Ground Direction OC Forward 0 to 4294967295 --- 1 F300 0
A07A POTT Rx 0 to 4294967295 --- 1 F300 0
A07C POTT Echo Lockout 0 to 65.535 s 0.001 F001 250
A07D POTT Target 0 to 2 --- 1 F109 0 (Self-reset)
A07E POTT Events 0 to 2 --- 1 F109 0 (Self-reset)
VT Fuse Failure Settings (Read/Write) (6 Modules)
A09A VT Fuse Failure Function 0 to 1 --- 1 F102 0 (Disabled)
A09B VT Fuse Failure Neutral Wire Open Function 0 to 1 --- 1 F102 0 (Disabled)
A09C VT Fuse Failure Neutral Wire Open 3rd Harmonic Pickup 0 to 3 pu 0.001 F001 100
A09D ...Repeated for module number 2
Table B–10: MODBUS MEMORY MAP (Sheet 43 of 65)
ADDR REGISTER NAME RANGE UNITS STEP FORMAT DEFAULT