GREER COMPANY
Crane Systems
GREER COMPANY 1918 East Glenwood Place, Santa Ana, CA 92705 TEL: (714) 259-9702 FAX: (714) 259-7626
MicroGuard® RCI 510/400 CALIBRATION MANUAL PN W450189A 09/09/02
7 of 65
USING THE DISPLAY KEYS IN COMMAND ROUTINES
During the calibration routines, the
A B C D
display keys are used to enter data
.
When entering the Calibration Security Code, use the 1234 format shown on page 6.
PRESS
A
to scroll forward to a command or option, to enter a current selection
into
the system, etc.
PRESS
B
to scroll backward to an option or command, etc
.
PRESS
C
to start a command, to confirm an entry, to calibrate, or to respond to
screen questions, etc.
PRESS
D
to exit a routine or abort a calibration
.
Follow directions in each command carefully. To enter numbers other than the security code,
use the number entry procedure.
If the display reads: “system out of service,” simultaneously press the “
Test
“ and “
Hold
“
keys
for a few seconds. The display will request entry of the calibration security code. Following
entry of the correct code, the user will be returned to the calibration mode.
When
using the number entry routine, always press
C
before exiting the routine to enter the
data into the system.
Display
scrolling keys (
A
and
B
) can be moved full circle allowing all options listed to be
viewed when moving in either direction.
The term “
repeat last entry
” is an option not a request. It allows the operator to repeat
entered information if a mistake is made.
ORs Full
9.7Klb Ctwt
ERECTED 60' TELEJIB 17 AUXHD ON
PICK FROM MAIN BOOM FRONT WINCH
TEST
MAX
SET
360
o
6
23,500
i2,300
44.8
62.7
26.4
o
C
D
B
A
THE RCI 510/400 DISPLAY
