Gamewell IDENTIFLEX 632, Руководство по установке и эксплуатации

Страница: 23 / 186

IF 632 Installation and Operation Manual Release: 3 01/31/01
23
SYSTEM I/O COMPONENTS (CONTINUED)
____________________________________________________________________________________________
Main Power
Supply
The Main Power Supply (MPS-8) is an eight 8 amp DC power supply. A battery
distribution block is provided to distribute battery power to Auxiliary Power
Supplies. It can be configured to transfer the system to standby power when a
"Brown Out" condition occurs. The main power supply mounts in the lower left hand
corner of the cabinet, and cables to the bus driver module.
Lead Acid
Battery
Charger
Module
The battery charger module is a plug-in type module that installs directly into the
main power supply. This module will monitor and recharge lead acid batteries from 5
to 60 Amp hours in capacity.
NOTE: The Battery Charger is configured for 41 - 60 AH batteries at the factory.
Remove R1 resistor for 21-40AH batteries. Remove R17 & R21 resistors for 5-
20AH batteries.
Auxiliary
Power Supply
The Auxiliary Power Supply (APS-8) provides eight (8) amps of unfiltered 24 VDC
power. Two (2), four (4) amp circuits are available from its connectors for signaling
power expansion. The auxiliary power supply has provisions for receiving a signal
from the main supply to switch to battery standby due to brown out condition.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com