Gamewell IDENTIFLEX 632, Руководство по установке и эксплуатации

Страница: 15 / 186

IF 632 Installation and Operation Manual Release: 3 01/31/01
15
GENERAL
Identiflex 632 Fire Alarm Control Panel with firmware version r7 is an update of the prior versions of IF 632 FACP. The
version r7 provides all of the features and performance of the previous IF 632 firmware as well as many new features and
improved panel configuration data storage.
NEW FEATURES
SmartStart Password
With the exception of the automatic SmartStart which occurs when firmware chips are installed in an
IF-600 panel, a level 4 password is required to initiate a SmartStart.
Releasing
Provides a multi-step releasing sequence with ANDed inputs, and programmable Pre-release, Abort and Dump.
Water Zone
Allows inputs to be designated as Water Flow with programmable delays, and selectable silencing.
Daylight Savings time
Allows automatic correction of the time for the entry and exit from daylight savings time.
Leap Year
Allows the automatic correction of the date for Leap Years. (Including the year 2000)
Positive Alarm Sequence
Allows Day/Night control of the use of PAS.
Verification Counter
Provides a tally of the number of times a Verification point activates without going into alarm, within the past 30
days. A programmable limit will place a point into trouble if the tally for that point exceeds the limit.
Alarm, Supervisory, Trouble Displays
Allows the selectable display of Alarms, Supervisories, or Troubles.
All Input Walk Test
Allows the placement of all inputs and outputs into walk test without individual programming.
Expanded RAN/SAN Supervision
Allows the supervision of up to 20 RAN/SANs connected to the panel.
Auto Silence Timeout
Allows the timeout for Auto Silence to be programmed.
Silence Inhibit
Allows the inhibit time for Signal Silence to be programmed.
Building Control Switch Supervision
Allows the switches on Building Control Displays to indicate Trouble if they are not in the Auto position.
Building Control Display Placement
Allows Building Control Displays to be located over an Analog card in the top two positions.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com