Gamewell IDENTIFLEX 632, Руководство по установке и эксплуатации, Страница: 131 / 186

IF 632 Installation and Operation Manual Release: 3 01/31/01
131
Change Menu 4
Change Menu
1=Menu 1 2=Menu 2 3=Menu 3
4=Menu 4 0=Exit
>4
Change Menu 4
1=Cfg 2=Water 3=Relse 4=Dump
5=Dict 6=Card 0=Exit
Change Config Changing the system configuration requires a previously downloaded system configuration
file. This option is only available when programming through a P. C. attached to the serial
port, or from the Master in a network.
WARNING: It is necessary to perform a Smart Start on
the panel before uploading a new configuration. Failure to
do so will result in unpredictable operation of the panel
Change Menu 4
1=Cfg 2=Water 3=Relse 4=Dump
5=Dict 6=Card 0=Exit
>1
[If network, upload will start at this point]
Ready to Upload Configuration File.
To
Upload:
1. Press PgUp
2. Choose 7 (ASCII)
3. Enter Filename
Change Water
Flow Delay The Change Water option allows the selection of the delay time before a Water flow alarm
is activated..
Change Menu 4
1=Cfg 2=Water 3=Relse 4=Dump
5=Dict 6=Card 0=Exit
>2
Waterflow Zone Delay Is Set To: 30 sec
Enter Waterflow Delay (5-90 sec):
Change
Releasing Delay The Change Relse option allows the selection of the time delay from the ANDed releasing
alarms to the Discharge command..
Change Menu 4
1=Cfg 2=Water 3=Relse 4=Dump
5=Dict 6=Card 0=Exit
>3
Releasing Delay Is Set To: 30 sec
Enter Releasing Delay (15-60 sec):
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com