Future Design MCT-CM, Руководство пользователя

Страница: 73 / 247

MCT-CM
73
MCT Function Runtime Menu Location Description
Digital Output Setup Device\Settings\Offline\Hardware\
Digital Output access digital output settings
NOTE: Once digital outputs are set in the runtime
application, this menu item can be disabled and hidden
from the operator so that OEM configuration is preserved
and cannot be accessed or altered.
Offline DI Monitor Device\Settings\Offline\Hardware\Monitor
access to view digital input status
Offline DO Force Device\Settings\Offline\Hardware\Force access to view digital output status as well as force digital
outputs on/off in offline mode
Tuning
Device\Settings\View\Tuning
access loop manual tuning parameter entry
Delta
Program\Entry\Wait ability to view/program delta control operation in an
automatic program
NOTE: If a program is loaded that has delta control
programmed, the operator will be unable to view or
change the settings.
Exit Application Device\Settings\Offline\System\Exit
access to exit application screen
4.8 Startup View
The Startup View screen is accessed from the Startup menu and allows the user or OEM to define which of the
main view screens the runtime application will display when it first starts
and when the “Home” icon is pressed.
The available selections are Loop View, Chart View, All View (Overview), Alarm View and Alarm Log.
NOTE: If the selected screen to view on startup is disabled in the MCT functions list, the screen will only be
available when the “Home” icon is pressed.
4.9 Digital IO/Event Tagnames
To gain access to the
“names” screens, there must be at least one digital input, digital output or event enabled
in the system on the IO Settings screen or the corresponding names screen will not be accessible.