Future Design MCT-CM, Руководство пользователя, Страница: 114 / 247

MCT-CM
114
User Right Menu Location Description
Offset Calibration Device/Settings/Offline/Calibrate/Offset enter bias for monitor points
Analog Inputs Device/Settings/Offline/Hardware/
Analog Inputs configure Analog Input(s) to act as remote set points for
specific loop controls
Analog Outputs Device/Settings/Offline/Hardware/
Analog Outputs configuration of PV, SP or %out retransmission from
specific loop controls
Digital Inputs Device/Settings/Offline/Hardware/
Digital Inputs configure Digital Inputs
Digital Outputs Device/Settings/Offline/Hardware/
Digital Outputs configure Digital Outputs
Force Device/Settings/Offline/Hardware/Force access to force digital outputs on/off
Security View/Security/Configure applies to Security Setup
Configuration Device/Settings/Offline/System/
Configuration access to import/export setup files of MCT
Default Configuration Device/Settings/Offline/System/
Configuration; Reset Default
Configuration button function to clear system configuration and reset all to
blank (default) state for reconfiguring
Exit (run mode) Device/Settings /Offline/System/Exit;
“Exit application. (automatic mode
startup).” button prevents MCT application from being stopped
Exit to Configurator Device/Settings /Offline/System/Exit;
“Exit Application. (configuration mode
startup).” button prevents MCT application from being stopped and access
to the MCT configurator application
7.4 Setting Security Options
The security
“Options” tab provides the administrator the ability to set the global security options.
Security is the global setting that turns the MCT security system on or off. The security system must be enabled
for the audit trail to be enabled.
Audit is a global setting that turns the audit trail on or off. When the audit trail is turned on, all user actions are
written to a daily log.
When enabled,
Verification requires that the logged in user must log in again before the entry value will actually
be changed.
The
Password Aging Days field is a global for all users. Password aging starts from the day the user is
entered into the system. The value can be set from 0 to 365 days. A value of zero disables password aging.