Future Design MCT-CM, Руководство пользователя

Страница: 106 / 247

MCT-CM
106
The program operation allows an operator to run, hold, stop, edit and select automatic programs. The Program
Operation window will display the program loaded in the MCT which is ready for operation by pressing the Run,
Hold Stop or Off buttons. If a program is already loaded, the user can start the program without entering a start
step. This offers a quick start/stop of programs for repetitive test operations. In this case, the program will
always start from step 1.
If entering a Start Step is required (to start the program on a specific step), press the
“Select” button and choose
the program from the list, then press the run button. This will display the Start Step entry.
The
start step can be adjusted up and down by pressing the right/left arrow buttons or by pressing the step
number field and directly entering the desired start step via the numeric keypad. Once the desired start step
number is entered, press the
“Start” button. The program will then be transferred to the control module and
started once the transfer is complete.
To stop
a program, select
“Stop” from the Program Operation window. When a program is stopped, the loop
set points and events will remain at their current values.
Selecting “Off” will also stop the program; however,
this will also turn off all system events at the same time. The Edit button will navigate directly to the program
Entry screen so a program can be created, edited and stored.
NOTE: If the program was set up with the auto start feature enabled, the program will enter the auto start
mode immediately upon start. Once the set date or day and time is reached, the program will begin
running. The start date shown on the Status view screen indicates when the program will start based
on the auto start settings.