Future Design MCT-CM, Руководство пользователя

Страница: 207 / 247

MCT-CM
207
*B8
Parameter
Value
Description
0 Program Not Running
1 Stop Program
2 Stop Program (All Off)
4 Hold Program
8 Run/Resume Program
16 Program in Autostart**
32 Program in Wait **
64 Program in Ramp**
128 Program in Soak**
256 Program in Guaranteed Soak**
*B9
Parameter
Value
Description
1 Program Advance to Previous Step
2 Program Advance to Next Step
*B10
Parameter
Value
High Order
Byte
Low Order
Byte
Description
Range Low 32 32 Program Name Character (ASCII Table)
Range High 126 126 Program Name Character (ASCII Table)
Example
Read command of registers 18 to 22 from the MCT returns the following values:
Register Values: 0x74 53 0x72 6F 0x20 65 0x65 54 0x74 73
ASCII Equivalent: t S r o e e T t s
Assemble the ASCII characters in order from low to high byte starting with register 18 in order to assemble the
Program name: “Store Test”. Note that null characters are not used in the Program name. A space (0x20) will
be used is used in place of a null character to maintain the 10 character name length if the Program name is
not ten characters long.
*B11
Parameter
Value
Range Low Range High Description
High Byte 0 99 Year
Low Byte 1 12 Month
This parameter only performs its function when the profile is in hold.
Once the set function is executed, this parameter automatically resets to
zero (0).
**These values are set by the MCT to indicate the operating status of the
profile and cannot be set directly.
See the ASCII character chart in
Section
3.1 for the character
representation of these values.