Future Design MCT-CM, Руководство пользователя

Страница: 174 / 247

MCT-CM
174
*NOTE: For the output control functions listed with an asterisk (*), the output is not activated for failed FTP or
email transmissions, NTS clock synchronization or communication alarms between the MCT and the
control module.
10.9 Digital Input Monitor
The Monitor screen provides the on/off status of all digital inputs available on the MCT control module. It is
useful for offline troubleshooting to verify input operation.
10.10 Digital Output Force
The Force screen allows the user to force any of the digital outputs on the MCT control module on, to test output
functionality and verify proper operation of equipment controlled by the output.
The
Time setting limits the maximum amount of time the outputs can be forced on. The force time can be set
from 0 to 32,760 seconds. This provides an automatic method to help prevent ‘runaway’ conditions in case an
operator leaves an output on, but has to walk away to accomplish another task and forgets to turn the output
off.
NOTE: Each time an output is turned on or off, the output force delay timer is reset. The automatic force
disable time begins from the moment an output switch is pressed.