manualshive.com logo in svg

Furukawa Unic URW376C4U -T Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Furukawa Unic URW376C4U -T Series Скачать руководство пользователя страница 91

11-19

HOW TO OPERATE CRANE

1. 

◆

How to make an emergency stop

•  How to make an emergency stop for 

the crane and reset it

Emergency stop switch

Emergency
stop switch

Head light

In case of emergency such as that the crane does not stop operation or the engine will not return 
to idling speed even if no crane operation has been made, depress the “EMERGENCY” switch 
on the switch panel. 
This makes the crane and the engine to stop operation forcibly.

 

★

When releasing the emergency stop switch, release it while no 

crane operation is being carried out.  

 

 

 

 

Releasing the emergency stop switch while operating the crane allows 
the crane to make an abrupt movement that is very dangerous.

WARNING

Depress the “EMERGENCY” stop switches 
on the switch panel of crane body and near 
head light.
The switch is held pushed in allowing the 
engine to stop operation.
When the switch is held pushed in, the engine 
cannot be re-started.
Rotate the emergency stop switch clockwise 
in arrow direction to return to its original 
state to release the switch.

• Remarks

When the emergency stop is reset by turn-
ing the “EMERGENCY” stop switch 
clockwise after the crane has been stopped 
by depression of “EMERGENCY” stop 
switch, the engine speed may increase in a 
moment which is not abnormal.
When the crane is operated with the 
“EMERGENCY” stop switch held pushed 
in, voice message, “Beep. Service remote 
Service remote control” may be issued or 
the mode indicator lamp may show incor-
rect indication.

Содержание URW376C4U -T Series





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды