manualshive.com logo in svg

Furukawa Unic URW376C4U -T Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Furukawa Unic URW376C4U -T Series Скачать руководство пользователя страница 68

10-10

HOW TO OPERATE CARRIER

1. 

◆

Starting, crawling, stopping the crane

1 

Press the pedal to release the interlock 
for crane-crawl operation and hold it.

Crawling straight

Forward

Forward

Neutral

Neutral

Backward

Backward

Crawling straight

• Adjustment of crawling speed

Accelerator pedal

2 

While sitting on the operator’s seat, 
shift the crawling levers (left and right) 

to the other side to make the crane to crawl 
forward and shift the levers to this side 
makes it to move backward. 

 

Shifting the levers to neutral allows the brake 
to be applied automatically.

When crawling at a slow speed, it is adjusted 
by how far the crawling levers are shifted.
Normal crawling speed is adjusted by how 
far the accelerator pedal is depressed with the 
crawling levers shifted to desired direction.

Button to change crawling speed

• Change of crawling speed

The crane crawls at higher speed while the 
button to change crawling speed is being 
depressed.
Release the button to allows the crane to 
crawl at low speed.
Do not depress the button when crawling a 
place such as on a slope, on unleveled ground 
where crawling resistance is larger.

Содержание URW376C4U -T Series





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды