manualshive.com logo in svg

Furukawa Unic URW376C4U -T Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Furukawa Unic URW376C4U -T Series Скачать руководство пользователя страница 37

9-1

9. DESCRIPTION OF EACH CONTROL DEVICE

 Overwinding alarm

1 

Turn ON the overwinding alarm switch 
before starting crane operation. 

If the alarm sounds while the hook is being 
hoisted up or the boom is being extended, 
stop the crane operation immediately and 
lower the hook or retract the boom.

2. 

◆

Operating procedures

 

★

When the overwinding alarm switch is turned OFF, overwinding 

alarm will not function even if the hook has been overwound.   
Be sure to turn the overwinding alarm switch ON before starting crane 
work and check that the overwinding alarm sounds every time when the 
weight for overwinding alarm is lifted up to the detector.

 

★

Since the length of wire rope hanging the weight is specified by laws 

and regulations concerned, do not make it short at random.

 

★

The alarm will sound even if any of electric wires connected to the 

overwinding detector at the boom top is broken. In this case, ask a UNIC 
service shop for repair.

OFF

ON

Overwinding alarm switch

Cord reel

Overwinding detector

Weight for over-
winding alarm

1. 

◆

Function of overwinding alarm

The device automatically makes an alarm 
sound to warn that the wire ropes are being 
overwound when the hook comes close to the 
boom top.

• Remarks 
Alarm will not sound when the alarm switch 
has been turned OFF.   

 

In normal operation, turn ON the overwinding 
alarm switch.

CAUTION

Содержание URW376C4U -T Series





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды