manualshive.com logo in svg

Furukawa Unic URW376C4U -T Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Furukawa Unic URW376C4U -T Series Скачать руководство пользователя страница 137

14-1

14. WATER SUPPLY AND LUBRICATION TO CARRIER

1.

 Clean filling ports and grease nipples thor-
oughly before carrying out lubrication.

2.

 Always supply new lubricant and prevent 
dusts from entering inside.

3.

  When supplying grease into each grease 

nipple, be sure to inject it until old grease 
is forced out of it.

Lubricate according to “Lubrication chart” 
and keep the following instructions in mind 
when carrying out filling water and lubrica-
tion.

  Precaution when

carrying out filling 

water and lubrication

 

★

Be sure to stop the engine, and store the boom and the outriggers 

before carrying out filling/replacing lubricant and/or fuel.

 

★

A fire source such as smoking cigarette in mouth is strictly prohib-

ited.

 

★

Do not rush to start supply of water, filling fuel, and lubrication as the 

engine and the parts close to the engine is heated to a high temperature 
immediately after the engine has been stopped.

WARNING

 

★

In order to ensure smooth oper-

ation of each part of the crane, 
minimum wear, and longer service 
life, be sure to supply lubricant 
as well as hydraulic oil which is 
indispensable to drive hydraulic 
equipment.

 

★

Warranty will not be given, 

even if it is within the period to be 
applied, for failure to observe the 
replacement of lubricant as speci-
fied

.

CAUTION

Содержание URW376C4U -T Series





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды