Furukawa Unic URW376C4U -T Series Скачать руководство пользователя страница 9

Страница: 9 / 156

2-1

2. SAFETY PRECAUTIONS ON CARRIER OPERATION

Before operation

★

Observe the cautions for securing safety.

Failure to observe the cautions may cause trouble or serious accident.

Be sure to make inspection before
operation and periodical voluntary

inspection.

If found something wrong, repair it immedi-
ately.

The crane is prohibited to crawl on a
public road by the road traffic law.

Dress neatly and wear protectors such as
helmet, safety shoes, and gloves without

fail.

★

Do not wear baggy clothes and accessories

which can be caught by control levers and fit-
tings, and oil-stained working clothes which
may catch fire.

WARNING

Check that no safety covers have been
left removed.

★

It is very dangerous to start the engine,

to operate the crane with the safety cover
removed as the driving mechanism is
exposed.

Be sure to stop the engine before refuel-
ing or supplying and changing lubricant.

A fire source such as smoking cigarette in
mouth is strictly prohibited.

Failure to observe this may cause a fire.

When starting the engine in a small lim-
ited area or indoors, open the windows

and doors for well ventilation.

★

Poor ventilation may invite an exhaust gas

poisoning.

Shift the interlock for crane-crawl lever
to “Crawl” when crawling the crane.

★

Crane will not work by controlling crane

operation levers with the interlock for crane-
crawl lever shifted to “Crawl”.

Pedal

Crawling

Interlock for crane-crawl
operation

Crawling lever

Содержание URW376C4U -T Series





























































































































































Результаты поиска

Содержание URW376C4U -T Series

Отзывы:

Бренды по названию

Популярные бренды

Furukawa Unic URW376C4U -T Series, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание URW376C4U -T Series

Отзывы:

Бренды по названию

Популярные бренды