Fukuda Denshi HS-8000 Series, Руководство по обслуживанию

Страница: 11 / 132

Precautions about Connections to Peripheral Devices
In the interest of safe and sufficient performance of this equipment, the connection of other
manufacturers’ equipment to the monitor is not authorized, unless the connection is explicitly
approved by Fukuda Denshi. It is the user’s responsibility to contact Fukuda Denshi to determine
the compatibility and warranty status of any connection made to another manufacturer’s
equipment.
W A R N I N G
For the connector with mark, only the peripheral devices specified by
Fukuda Denshi should be connected with the given procedure. Use of an
unspecified device may cause electric shock to the patient and/or operator
due to excessive leakage current.
C A U T I O N
z For safety reasons, the peripheral device connector on this unit (analog
output connector) is insulated from the circuit applied to the patient.
z The circuit connected to this unit on the peripheral side is not necessarily
insulated. Therefore, since touching the peripheral directly may result in
electric shock to the patient, always position the peripheral away from the
patient.
When connecting peripheral devices to this unit, it is the user’s responsibility to verify that the
overall system complies with IEC 60601-1-1, “Collateral Standard: Safety Requirements for
Medical Electrical Systems”.
Accessories and Optional Accessories
W A R N I N G
Use only the cables specified by Fukuda Denshi.
y Use of other cables may result in increase in emission (unnecessary generation
of electromagnetic energy from this unit) or decrease in immunity (resistance
characteristics to electromagnetic interference generating from other device).
y
We cannot assure the performance of this unit when other cables are used.
vii