Fukuda Denshi HS-8000 Series, Руководство по обслуживанию

Страница: 107 / 132

9
－
11
Bootcode Revision
Displays the bootcode version of the Capnostat 5 connected to the HPD-800.
CO2 Status/Errors
Display the status related to the CO
2
measurement of the Capnostat 5.
For standard usage, “00, 00, 00, 00, 00” is indicated. When failure occurs, the following codes are
indicated.
Display code Error code Description of error
xx, xx, xx, xx, 01 Abnormal temperature
of Capnostat 5 Sensor temperature exceeds 40 ° C.
xx, xx, xx, xx, 02 Hardware failure of
Capnostat 5 Hardware failure of Capnostat 5 is
detected.
*The Display code “xx” means unspecified number.
The following codes display the Capnostat 5 status.
Display code Status item Description of status
xx, xx, xx, xx, 04 Capnostat 5 sleep
mode Capnostat 5 is in sleep mode.
xx, xx, xx, xx, 05 Capnostat 5 is zeroing. Capnostat 5 is in Zero Calibration.
xx, xx, xx, xx, 06 Capnostat 5 is
Warming Up. Capnostat 5 is in warm-up condition.
xx, xx, xx, xx, 07 Zero calibration for
Capnostat 5 is
required. Capnostat 5 is in need of Zero calibration.
xx, xx, xx, xx, 08 Out of CO
2
range for
Capnostat 5
CO
2
numeric data of Capnostat 5
becomes out of measurement range.
xx, xx, xx, xx, 09 Airway Adapter check
request Airway Adapter check is required.
The following cases are assumed.
・
where there is no Airway Adapter
・
where the Airway Adapter is not clean
*The Display code “xx” means unspecified number.
Hardware Status
Displays the status related to the Capnostat 5.
For standard usage, “00,00” is indicated. If a code other than the above is indicated, Capnostat 5
may be defective. Replace the Capnostat 5.