Fukuda Denshi HS-8000 Series, Руководство по обслуживанию

Страница: 100 / 132

9
－
4
EEPROM(HS-8000)
：
Checks the EEPROM data.
Checks the equipment information or operation time written in the
EEPROM.
For details, refer to the section on EEPROM display.
Maintenance SpO
2
：
Displays the status of the SpO
2
measurement unit.
When measurement interference occurs, write down the Error Report
and contact our service representative.
Arrhythmia Analysis
：
Displays sampling values for Arrhythmia Analysis and the analyzed
data.
Log 1 (HS-8000)
：
Records the Power ON/OFF time and information if abnormal restart or
exception handling occurs. This information can be used to find solution
when equipment failure occurs.
Maintenance CO
2
：
Displays the status of the EtCO
2
measurement unit. When
measurement interference occurs, write down the status and contact
our service representative.
CF Card
：
Is used when the SD card used for HS-8000 needs to be formatted.
*Do not format the SD card when the patient data storage function
(Trend, Tabular Trend, Recall, or long-duration recording) is used.
If the card is formatted, the patient data is erased.
HS-8000 WDT TEST
：
WDT test used for factory inspection. Normally, do not press this key.
Analog Adjust (Default)
：
In conjunction with the DS-8500 main unit, the HS-8000 analog
board is adjusted.
A special tool is required to adjust the analog board.