Fuji Xerox DocuPrint P455 D, Руководство пользователя

Страница: 237 / 302

Troubleshooting
237

Wrinkled/Stained Paper
Problem Action
The output is wrinkled.
The output is stained. Verify that the correct print media is being used.
See also:
• "Usable Print Media" on page 118
• "About Print Media" on page 116
If not, use the print media recommended for the printer.
If the problem with printing on an envelope persists, check the wrinkle of the
envelope.
If the problem with printing on a print media other than envelopes persists, contact
the Fuji Xerox local representative office or an authorised dealer.
Envelopes may get wrinkled depending on their paper type and condition.
Check whether the wrinkle of the four edges of the envelope is within 30 mm.
If the wrinkle of the four edges of the envelope is within 30 mm, this type of wrinkle is
considered normal. Your printer is not at fault.
If not, load the envelopes in the bypass tray properly.
Load the envelopes in the bypass tray properly.
See also:
• "Loading Envelope in the Bypass Tray" on page 129
If the problem persists, replace the fusing unit as instructed in "Replacing the Fusing
Unit, Transfer Unit, Retard Roll, Feed Roll and Nudger Roll" on page 261 .
Replace the fusing unit if you have a spare unit.
See also:
• "Replacing the Fusing Unit, Transfer Unit, Retard Roll, Feed Roll and Nudger
Roll" on page 261
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.