Fuji Xerox DocuPrint CP225 w, Руководство пользователя

Страница: 164 / 187

164 Troubleshooting
Non-Genuine Mode
When toner within a toner cartridge is empty,
Replace XXXX Cartridge
(
XXXX
:
Yellow
,
Magenta
,
Cyan
, or
Black
) appears on the LCD panel.
When you want to use the printer in the Non-Genuine mode, enable the Non-Genuine mode and replace the toner
cartridge.
IMPORTANT:
• If you use the printer in the Non-Genuine mode, the performance of the printer may not be at its optimum. Any problems that
may arise from the use of the Non-Genuine mode are not covered by our quality guarantee. The continuous use of the Non-
Genuine mode can also cause the printer to break down, and any repair charges for such break down will be incurred by
users.
NOTE:
• To disable the Non-Genuine mode, select
Off
for
Toner
in
Non-Genuine Mode
on the operator panel or deselect the check
box next to On on the Non-Genuine Mode page on the Printer Setting Utility.
 Using the Operator Panel
NOTE:
• Before starting the operation described below, confirm that
Ready to Print
is displayed on the LCD panel.
1
Press the ( Menu ) button.
2
Select
Admin Menu
, and then press the button.
3
Select
Maintenance
, and then press the button.
4
Select
Non-Genuine Mode
, and then press the button.
5
Select
Toner
, and then press the button.
6
Select
On
, and then press the button.
The printer switches to the
Non-Genuine Mode
.
 Using the Printer Setting Utility (Windows Only)
The following procedure uses Windows 7 as an example.
1
Click Start  All Programs  Fuji Xerox  Fuji Xerox Printer Software for Asia-Pacific  your printer 
Printer Setting Utility .
NOTE:
• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in
Printer Name .
The Printer Setting Utility opens.
2
Click the Printer Maintenance tab.
3
Select Non-Genuine Mode from the list at the left side of the page.
The Non-Genuine Mode page is displayed.
4
Select the check box next to On , and then click Apply New Settings .