Fuji Xerox DocuPrint C4350, Руководство пользователя

Страница: 276 / 369

6.5 List of Messages
246
Trouble
s
hooting
6
027-797
[Cause] Destination e-mail address is illegal.
[Action] Specify the correct address, and send the e-mail again.
“4.13 Sending a Document to the Printer by E-Mail (E-mail Print-
ing)”(P.90)
116-701
[Cause] 2 sided print cannot be done, as memory is insufficient.
[Action] It is recommended to increase memory capacity.
116-702
[Cause] Alternative font is used for printing.
[Action] Check the print data.
116-703
[Cause] An error occurred in PostScript.
[Action] [Action] Check the print data or set bidirectional communication
to off using spool setting of [Advanced] tab of the print driver.
116-710
[Cause] It is possible that document size judgment is incorrect, as receive
data exceeds the HP-GL, HP-GL/2 spool size.
[Action] It is recommended to increase the allocated HP-GL or HPGL/2
auto layout memory or install the extension hard disc.
116-711
[Cause] The specified size and orientation of PCL form do not match the
print paper.
[Action] Correct the paper size and orientation according to specified PCL
form and then retry.
116-712
[Cause] The form cannot be registered, as PCL form memory is insuffi-
cient.
[Action] Delete unnecessary forms and increase the PCL form memory
capacity.
116-714
[Cause] An HP-GL or HP-GL/2 command error occurred.
[Action] Check the print data.
116-715
[Cause] The form cannot be registered, as the upper limit of PCL form
registration has reached.
[Action] Delete unnecessary forms.
116-718
[Cause] The specified PCL form is not registered yet.
[Action] Use an already registered form or newly register the form. The
form registration status can be checked using [PCL Forms List].
“5.6 Printing Report/List”(P.152)
116-737
[Cause] User definition data cannot be registered, as PCL user definition
memory is insufficient.
[Action] Delete unnecessary data or increase the PCL user definition
memory capacity.
Error code Cause/action