12 Compliance with standards
12-2
FVR-C11S-EN
12
12-2 Compliance with EMC
directive in EU [Applicable to
products with CE mark]
12-2-1 General
The CE mark indicated on the FVR-C11S series
concerns with European minister directorate di-
rective 89/336/EEC concerning the environmen-
tal electromagnetic compatibility EMC, and other
directives are not included.
The CE mark does not prove that the entire ma-
chine or system housing our product complies
with the EMC directive. Therefore indication of
the CE mark to the entire machine or system will
be done at the responsibility of the manufacturer
or the machine. This is because:
1. The CE mark attached on our product sup-
poses operation of the product under certain
conditions. Satisfaction of the conditions is up
to the manufacturer of the machine.
2. Generally speaking, various devices are used
in a machine or system as well as our prod-
uct. Therefore consideration for the entire
machine or system must be paid by the man-
ufacturer of the machine.
The EMC directive includes immunity to the in-
coming noise and emission of outgoing noise.
The general purpose inverter houses an internal
element switching at a high speed which gener-
ates electric noise.
Applicable standards
Immunity: EN 61800-3
Emission: EN 61800-3
Above-mentioned "certain conditions" include
installation of a dedicated RFI filter in a metallic
control panel.
Refer to in exclusive Instruction Manual for RFI
Filter for details.
12-3 Compliance with low voltage
directive in EU [Applicable to
products with TÜV or CE
mark]
12-3-1 General
The general purpose inverter is applicable for
the low voltage directive in EU. Compliance of
the FVR-C11S series with EN 50178/1997 has
been obtained from a testing organization in EU
and compliance with the low voltage directive is
asserted.
12-3-2 Precautions
Refer to "Compliance with low voltage directive
in EU" on pages 2 and 3 when using our product
as one complying with the low voltage directive
in EU.
