FVR-C11S-EN
5-20
5 Selecting Function
5
Change during operation: X = impossible,
= possible (enabled by using
),
= possible (enabled by using
)
Data initialization
This function initializes data items set with all
functions to values set in the factory.
Manually set value
to
Initialized (factory set value)
The display is changed from
to
when the
and
keys are pressed simul-
taneously.
When the
key is pressed under this
condition, initial data is written and a frequency
set by the built-in POT (VR) is displayed auto-
matically.
Retry
This function selects a retry operation if the in-
verter is tripped.
: No retry
to
: The retry count is fixed to 5 and retry
starts when 0.5s elapses after tripping.
Retry is attempted only for an overcurrent/over-
voltage trip that occurs during operation.
Cooling fan on/off control
: ON-OFF No control (always on)
to
: ON-OFF Control
(The fan is turned off when the inverter
temperature becomes low after opera-
tion is stopped.)
PID control (Mode select)
The feedback signal value (%) is displayed by
assuming the full scale to be 100% when a PID
control operation is selected.
Factory setting
Change during
operation
0
X
Factory setting
Change during
operation
0
H03
0
1
0
1
H04
0
1
Factory setting
Change during
operation
0
Factory setting
Change during
operation
0
X
: Inactive
Select a PID
control operation.
: Active (forward)
: Active (reverse)
H06
0
1
H20
0
1
2
