Frigomat GX2, Инструкция по установке, эксплуатации и обслуживанию, Страница: 22 / 76

EN
FRIGOMAT GX2, GX4 3
Label: use of power cord with the characteristics indica-
ted (fig.I/09).
The label indicates which features the power cord should
have if it is replaced.
Label: ground connection (fig.I/10)
This equipment must be properly grounded! Failure to do so
can result in severe personal injury from electrical shock!
Label: obligation to disconnect the machine before car-
rying out maintenance / repairs (fig.I/11)
Disconnect the power supply before servicing the machine.
Label: Rohs2 compliant machine (fig.I/12)
Label: RAEE compliant machine (fig.I/13)
For decommissioning, comply with the standards in force in
the country where it is used.
Label: allowed water pressure values (water models) (fig.I/14)
Report the minimum and maximum permissible pressure values.
Label: contains regulated gases (fig.I/15)
Gas specification contained in the hermetically sealed refrigerant circuit.
Label: specific refrigerant gas (fig.I/16)
Use only the gas indicated on the label.
4.2 Electrical Box Warning Label
Label: danger high voltage inside (fig.I/17)
High voltage inside, danger of electrocution. Disconnect the Power Supply
Before Servicing the Unit.
Label: electrical protection insertion obligation (fig.I/18)
Connect to a circuit protected by fuses or HACR type circuit breaker.
Label: use of power cord with the characteristics indicated (fig.I/19)
The label indicates which features the power cord should have if it is repla-
ced.
Label: correct rotation direction (fig.I/20)
The label indicates how to reverse the direction of rotation in three
-
phase
machines.
5 SAFETY DEVICES
The machine is equipped with the following safety devices:
Shearing
-
prevention safety device
Implemented by means of a safety circuit compliant with the European direc-
tive, it intervenes when the cover is opened, temporarily switching the ma-
chine to STOP mode.
Beater motor overheating safety device
Implemented by means of automatic reset circuit breaker
-
relays; they pro-
tect the machine beater motor operation from overloads.
Hermetic compressor motor overheating safety device
Implemented by means of automatic reset thermal
-
ammetric sensors; they
protect the machine compressor motor operation from overloads. The pro-
tection device intervention determines the temporary stop of the compressor
motor only.
Chiller circuit over
-
pressure safety device
Implemented by approved automatic reset safety pressure switches; they
protect the integrity of the chiller circuit from overpressure.
Protection against short circuit of auxiliary utilities:
Implemented by fuses which intervene on the auxiliary power supply in the
event of short
-
circuits.
Safety circuit SELV
The keyboards are powered by low voltage safety.
fig.I/09
fig.I/17
fig.I/10
fig.I/11
fig.I/12
fig.I/13
fig.I/14
fig.I/15
fig.I/16
fig.I/18
fig.I/19
fig.I/20