Fresenius Medical Care multiFiltrate Скачать руководство пользователя страница 55

Страница: 55 / 282

Chapter 4: Operation

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

4-13

Note

After turning the device off, wait for approximately 10 seconds before
turning it on again.



Connect the device to the power supply.



Connect the equipotential bonding
connector to the rear of the multiFiltrate
device.



Press the power switch on the rear of the
device.

Tip

If used tubing systems are still present in the blood circuit module, these
can be removed by opening the pump cover and pressing the

[START/RESET]

key.

The green LED is illuminated.

All systems are supplied with voltage.

The battery is being charged.



Press the

[On/Off]

key for approx.

3 seconds until the yellow LED is
illuminated.

The processor check starts automatically.

The software version (X.X) and the language
version ("en" for English) are displayed.

Содержание multiFiltrate



























































































































































































































































































Результаты поиска

Содержание multiFiltrate

Отзывы:

Бренды по названию

Популярные бренды

Fresenius Medical Care multiFiltrate, Инструкция по эксплуатации

Результаты поиска

Содержание multiFiltrate

Отзывы:

Бренды по названию

Популярные бренды