manualshive.com logo in svg

Fresenius Medical Care multiFiltrate, Инструкция по эксплуатации

Поделиться
Скачать
Fresenius Medical Care multiFiltrate Скачать руководство пользователя страница 29

Chapter 2:  Important information

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

2-13

2.12.3 Warnings relating to the system

Warning

 

Risk of injury due to device defect

 

If the device has the following defects, the measures given below must 
be taken.

Defects on the device:
– Mechanical damage
– Defective power supply connection line
– Other defects
– The device does not respond as expected
– Deterioration in the performance characteristics

Measures:

An ongoing therapy must be terminated.

The device must be taken out of service.

Inform the responsible organisation or service support without delay.

Warning

 

Risk of injury if device tilts

 

Risk of tilting when pushing the device or leaning against it

If lateral force is exerted, this may result in tilting or slipping of the 
device.

Observe the information on relocation and transport.

Warning

 

IV pole

 

Danger in case of excessive load (respect the maximum load)

If the load on the IV pole is too high, the device may tilt.

Ensure that the maximum allowed load on the IV pole of 6 kg is not 
exceeded.

Содержание multiFiltrate



























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды