Fresenius Medical Care multiFiltrate Скачать руководство пользователя страница 183

Страница: 183 / 282

Chapter 5: Alarm processing

Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015

5-17

If the blood leak detector detects blood in the
filtrate line, this is indicated by an audible
signal and a message.

The blood pump is stopped.



Continue the treatment by pressing the

[START/RESET]

key.

The blood pump is started.
The override time for the blood leak
detector is 2 minutes.

The blood leak detector can be deactivated
for MPS during the override time in the

Treatment

menu:



Deactivate the blood leak detector with the

[Blood leak detector]

button.

After the safety prompt to deactivate the
blood leak detector has been confirmed with

[Yes]

, the blood leak detector no longer

monitors for haemolysis or blood loss (

Blood

leak detector deactivated!

). Monitoring can

be reactivated at any time in the

Treatment

menu.

Содержание multiFiltrate



























































































































































































































































































Результаты поиска

Содержание multiFiltrate

Отзывы:

Бренды по названию

Популярные бренды

Fresenius Medical Care multiFiltrate, Инструкция по эксплуатации

Результаты поиска

Содержание multiFiltrate

Отзывы:

Бренды по названию

Популярные бренды