Franklin Fueling Systems TS-SCM, Руководство по установке

Страница: 18 / 40

14
TURBINE PUMP INTERFACE (TPI) APPLICATIONS (ALTERNATE STP CONTROL)
TPI is an alternative to using the Relay Module to actuate an STP on demand (from a dispenser request
or TS-SCM). Just as with using a relay channel, this method will provide positive pump shutdown on
alarm (if that option is chosen in the setup). When using the standard TPI feature of the console to control
a STP, be sure to map the TS-SCM vacuum sensor as an Input for the STP it is connected to (as shown
below). This allows the TS-SCM application to actuate the STP when it is necessary to regulate the
vacuum levels in the containment. (For further information, see the “ADDITIONAL DOCUMENTATION”
section.)
Example: TPI Setup
Group Name Parameter Name Parameter Value
Power Supply
RS-485 Enable Interface Yes
TS-TPI Enable Interface Yes
Controllers
A
Number of Controllers 3
Controller 1
Name Unleaded Controller
Enabled Yes
Type Mag/Eco
Address 1
Group 0
Tank 1
Height 5.00 in
Number of inputs 2
Input 1
Type AC Input Module
Channel Unleaded Hook Signal
Input 2
Type 4-20mA Input Module
Channel Unleaded SCM Vacuum Sensor
Controller 2
Name Premium Controller
Enabled Yes
Type Smart I
Address 2
Group 0
Tank 2
Height 5.00 in
Number of inputs 2
Input 1
Type AC Input Module
Channel Premium Hook Signal
Input 2
Type 4-20mA Input Module
Channel Premium SCM Vacuum Sensor
Controller 3
Name Diesel Controller
Enabled Yes
Type Smart III
Address 3
Group 0
Tank 3
Height 5.00 in
Number of inputs 2
Input 1
Type AC Input Module
Channel Diesel Hook Signal
Input 2
Type 4-20mA Input Module
Channel Diesel SCM Vacuum Sensor