Formax 6602 Series, Руководство оператора

Страница: 28 / 93

27
ENGLISH
Initially the document stoppers are adjusted for
position B. In this position a wide variety of
documents can be handled (max. 297 mm; 11.7
inch) and adjustment is not needed.
When a job is selected in which a different stopper
position has been programmed, the operator has to
put the document stoppers in the correct position as
indicated by the display.
To adjust the stopper position:
1. Lift and hold the collator arm D.
2. Squeeze the stopper and pull the front side tab
up.
To replace the stopper:
1. Place the flat back tab into the slotted hole.
2. Push the stopper into position.
Stop position A can handle documents up to 148 mm (5.8 inch), stop position B can
handle documents up to 297 mm (11.7 inch) and stop position C can handle documents
up to 356 mm (14 inch).
3.5 Loading Envelopes
3.5.1 Adjusting Side Guides
Adjust side guides B by rotating thumb wheel C, so
that the envelopes:
• Fit exactly between the side guides
• Can move freely
Note
If the distance between the side guides is too large,
the envelopes will twist sidewards, when transported
into the machine.
3.5.2 Stacker Side Guides
The side guides of the stacker are adjusted
simultaneously with the envelope feeder side guides
by turning the thumbwheel C. There are no
adjustments needed for stacking the inserted
envelopes.
3.5.3 Envelope Separation
To set the envelope separation:
1. Turn knob A counter clockwise until two envelopes (flap down and trailing), one on top
of the other, can be moved backward and forward between the rollers without
resistance.
A B C D
C B A