12
The job information function is available in all the menus where the button
is shown.
•
: go to the “job selection” menu to select another job (see
3.7.2 ”Select Another Job” on page 31).
•
: go to the “test run” menu to perform a test run (see ”Perform a Test
Run” on page 32).
•
: go to the “counters” menu to reset the counter or to set a stop value
(see 2.4.3 ”Counters” on page 15).
•
: go to the “AutoSet” menu to start an AutoSet job (see
3.7.1 ”Using AutoSet” on page 28).
•
: rotate display 180°. Only available if the insert’n Frank™ / insert’n
Mail option, level 2 or 3, is installed.
•
: go to the “main menu (2)”.
The “main menu (2)” shows 6 different functions:
•
: job information (see 2.4.2 ”Job
Info” on page 13): shows job details.
•
: change display and volume
settings (see 2.4.4 ”Display Settings” on page
15).
•
: go to the “job menu” to create,
edit, copy or delete a job (see 2.4.5 ”Job Menu”
on page 16, only for authorized personnel).
•
: go to the “supervisor menu” to change system settings (see
2.4.6 ”Supervisor Menu” on page 16, only for authorized personnel).
•
: return to the “main menu (1)”.
•
: rotate display 180°. Only available if the insert’n Frank™ / insert’n
Mail option, level 2 or 3, is installed.
Содержание 6602 Series
Страница 1: ...6602 Series Inserters OPERATOR MANUAL FIRST EDITION 8 2007...
Страница 6: ...5 ENGLISH Conventions Note A note gives additional relevant information...
Страница 7: ...6...