46
6. Press
to save the job with the entered settings under the specified job number
and name.
To name a job, see 3.9.7 ”Job Name” on page 43.
7. Press
to perform a test run with the new job settings (see ”Perform a
Test Run” on page 32).
3.11
Copy a Job
To copy existing job settings or AutoSet jobs to a new job:
1. Press
from “main menu (2)” (see 2.4.1 ”Main Menu” on page 11).
2. Enter the pin code.
The “job menu” opens (see 2.4.5 ”Job Menu” on
page 16).
3. Press .
The “copy job” menu appears.
4. Press the arrows if you want to select an other
job number to copy from or to copy to.
Note
You can only copy job settings to new jobs.
5. Press
for details of the job to copy from.
6. Press
to copy the job settings.
If all jobs are programmed the display shows “No more free jobs”.
It is possible to copy an AutoSet job into a job. Before an AutoSet job can be copied
AutoSet must be defined successfully (see 3.7.1 ”Using AutoSet” on page 28).
3.12
Delete a Job
To delete an existing job:
1. Press
from “main menu (2)” (see 2.4.1 ”Main Menu” on page 11).
Содержание 6602 Series
Страница 1: ...6602 Series Inserters OPERATOR MANUAL FIRST EDITION 8 2007...
Страница 6: ...5 ENGLISH Conventions Note A note gives additional relevant information...
Страница 7: ...6...
