53
ENGLISH
Exit Control
The following exit control possibilities are available:
•
When the “exit control” mark is printed, sets will be sent to the stacker. When no “exit
control” mark is printed, sets will leave the machine from the side exit.
•
When the “exit control” mark is printed, sets will leave the machine from the side exit.
When no “exit control” mark is printed, sets will be sent to the stacker.
Present on Deck & Continue
When the “present on deck & continue” mark is printed, sets will be sorted and leave from
the upper unit. The system does not stop processing.
Note
The envelopes will not be sealed.
Present on Deck & Stop
When the “present on deck & stop” mark is printed special sets will be sorted and leave
from the upper unit. However in this case the system will stop.
Note
The envelopes will not be sealed.
Sealing Control
When the “sealing control” mark is printed, sets will not be sealed. When no “sealing
control” mark is printed, sets will be sealed.
Sequence Check
Sheets in a stack can accidentally get out of sequence or can be missing. This can be
detected by the machine: each sheet has a number that forms part of the reading code.
These are the available possibilities:
•
Pages are numbered 1-2-1-2-1-etc. This requires one additional sequence mark.
•
Pages are numbered 1-2-3-4-1-2-3-4-1-
2-etc. (see figure). This requires two
additional sequence marks.
•
Pages are numbered 1-2-3-4-5-6-7-8-1-
2-3-etc. This requires three additional
sequence marks.
1
A
A
B
B
B
C
C
2
3
4
5
6
7
#1
#2
#3
#4
#1
#2
#3
Содержание 6602 Series
Страница 1: ...6602 Series Inserters OPERATOR MANUAL FIRST EDITION 8 2007...
Страница 6: ...5 ENGLISH Conventions Note A note gives additional relevant information...
Страница 7: ...6...