background image

82

We recommend that materials to be handled are stored at a temperature of 20°C 
(68°F) with a relative humidity factor of 50%. If difference in temperature occurs 
between store room and mailing area, the material has to be stored near the machine 
at least 24 hours before use.

Self-copying paper may cause rubber parts to wear quicker. The rubber used in this 
machine has the best resistance to Wiggins Teape material.

7.6

Specifications 

Production 

Feeder

Model

MF-1

Type

high capacity feeder

Theoretical max. 
speed

see 7.1 ”Technical Specifications Inserter System” on page 80

Power consumption

low voltage supplied by the inserter system

Approvals

EMC Certificate conform EMC-Directive. 
FCC Certificate conform 47CFR, part 15.
UL Listed I.T.E. (Information Technology Equipment),
conform UL-IEC 60950, file: E153801.
Conform NEN-EN-IEC 60950 and derivatives.

Height
Width
length

210 mm (8.3 inch)
285 mm (11.2 inch)
425 mm (16.7 inch)

Weight

5.05 kg (11.1 lbs)

Noise level

see 7.3 ”Other Specifications” on page 80

Operating 
temperature

10°C - 40°C (50°F-104°F)

Humidity

30%-80%

Feed tray capacity

1200 sheets A4 80 gr.
320x Business Reply Envelopes

Document / BRE 
insert specifications

see 7.4 ”Document Specifications” on page 80 and 
7.5 ”Envelope and Insert Specifications” on page 81

Содержание 6602 Series






























































































Отзывы: