Formax 6602 Series, Руководство оператора

Страница: 80 / 93

79
ENGLISH
Flap not
sufficiently
moistened. Water level low. Check water level,
refill if needed. “Sealing Envelopes” on
page 28
Brushes dry. Check brushes,
replace if needed by
the extra soaked set. “Sealing Envelopes” on
page 28
Brushes dirty. Check brushes, clean
if needed. “Operator Maintenance”
on page 72
Moistening felt dry. Check the moistening
felt, refill water tray
if needed. “Sealing Envelopes” on
page 28
Moistening felt dirty. Check the moistening
felt, clean if needed.
“Operator Maintenance”
on page 72
Moistening brushes
inactive. Activate the
moistening brushes. “Sealing Envelopes” on
page 28
Brushes worn out. Replace brushes. “Operator Maintenance”
on page 72
Moistening felt worn
out. Replace moistening
felt. “Operator Maintenance”
on page 72
Envelope not
always ejected
from sealer. Inserted document
too big. Check fold settings,
adjust if needed. “Fold Settings” on
page 38
Document not
inserted deep
enough. Check adjustment of
envelope stop
position and fingers. “Insert Position” on
page 30
Sealing area dirty. Clean sealing area. “Operator Maintenance”
on page 72
No document fed. Feeder empty. Refill feeder. “Filling the Document
Feed Tray” on page 26
Separation set too
wide / too tight. Adjust the
separation. “Document Separation”
on page 25
Side guides set too
narrow. Adjust the side
guides. “Side Guides” on
page 25
Skewed
documents fed. Side guides set too
wide. Adjust side guides. “Side Guides” on
page 25
Double
documents fed. Separation set too
wide. Adjust the
separation. “Document Separation”
on page 25
Document
stoppage at
collating area. Stopper position set
incorrect. Adjust stopper
position. “Adjustment of the
Document Stoppers” on
page 26
Symptom Possible cause Remedy Reference