56
Example Code
In this example a set of 8 sheets with three selective
feeds (station 2, 3 and 4) and three sequence check
marks is shown.
•
The first position is used for the start mark
which must be printed on every sheet.
•
The second mark position is used for the insert/
accumulate command. The mark is printed on
the last sheet of the set (inserting is required).
•
Position 3, 4 and 5 are reserved for selective
feeding from station 2, 3 and 4. Print a mark on
position 3 when a selective feed from station 2
is required. Print a mark on position 4 when a
selective feed from station 3 is required. Print a
mark on position 5 when a selective feed from
station 4 is required. The marks are printed on
the last sheet of the set.
•
Position 6, 7 and 8 are used for the sequence check marks. The meaning of the
sequence check marks is explained in section ”Sequence Check” on page 53.
4.2.5
2-track OMR
2-track OMR uses two OMR-tracks to read OMR data from. The main purpose of 2-track
OMR is reliability. The marks on the second track are inverted. This means that when a
mark is read at the first track no mark (space) is expected at the second track. Two track
OMR is only possible when the feeder is equipped with two reading heads and OMR level 5
is installed.
The insert/accumulate and divert (stop and continue) are combined in two marks. The
start mark and safety mark are not available in 2-track OMR.
The table on the next page supplies an overview of the OMR-marks for 2-track OMR. A
stands for the first track, B for the second track.
Sheet 1 Sheet 2
Sheet 3
Sheet 4
Sheet 5
Sheet 6
Sheet 7
Sheet 8
Содержание 6602 Series
Страница 1: ...6602 Series Inserters OPERATOR MANUAL FIRST EDITION 8 2007...
Страница 6: ...5 ENGLISH Conventions Note A note gives additional relevant information...
Страница 7: ...6...
