14
The “info-job (2)” menu contains the following extra
job information:
The “info-loading instructions (3)” menu shows the
way you should load documents (see
3.4.1 ”Document Orientation” on page 24) and
envelopes (see 3.5.4 ”Feeding Envelopes” on page
28).
The example shows the following situation:
•
Envelopes: flap down and trailing
•
Address carrier in lower feeder (feeder 1), face
up and leading
•
Document in other feeder (feeder 2), face up
and leading
Gives information about the exit
settings. The arrow to the left indicates
which envelopes leave from the side exit,
the arrow up indicates which envelopes
are stacked. The example shows exit
settings by batching: 5 envelopes to the
side exit, 5 envelopes to the stacker. See
3.9.8 ”Exit Select Settings” on page 43.
The sign below this icon shows if the
document double feed detection for the
relevant feeder and (optional) Thin Booklet
Feeder is switched on -
or off -
. This icon is also shown at the
inserter. In this case it indicates if the
document thickness detection is
switched on - or off - .
Shows the weight settings.
If this sign is shown sealing is on.
Shows the type of fold. The numbers next to this icon indicate the fold
positions.
Shows the document stopper position.
5
5
b
Содержание 6602 Series
Страница 1: ...6602 Series Inserters OPERATOR MANUAL FIRST EDITION 8 2007...
Страница 6: ...5 ENGLISH Conventions Note A note gives additional relevant information...
Страница 7: ...6...