Fluke endurance series, Руководство пользователя

Страница: 72 / 102

Endurance® Series
Users Manual
60
8.3.2.2. Configuration
The Endurance
®
PROFINET IO device configuration is in accordance with the physical
arrangement of the node (slot oriented).
Module slot 0 contains the Endurance
®
PROFINET in its function as station substitute. It does
not deliver process data itself, but provides the parameters required to perform communication
settings of the I/O device (e.g. update cycle time).
Slot 1 (Input/Output module) reflects the physical arrangement of the pyrometer, that deliver a
part of the process and diagnostics data. All specific information on the relevant module is
contained in the associated GSD file.
8.3.3. Parameter Setting
The parameter setting of a connected pyrometer happens
via “record data” sets. The I/O
module allows diagnostics message to be locked or released. Once all parameter settings are
performed, the I/O device signals that it is ready to send cyclic productive data.
8.3.3.1. Pyrometer parameters
Certain pyrometer characteristics are parameterizable during the configuration. The parameters
of the pyrometer substitute are used to set the overall settings of the PROFINET I/O node.
Some of the setting are used in the module as default settings and can be optionally overwritten
within the module configuration.
Parameter Description Setting
Temperature unit Set the temperature unit Celsius
Fahrenheit
Color mode 1 , 2 color
Slope * 1000 (0.9

900)
850 … 1150
Emissivity * 1000 (0.9

900)
100 … 1100
Transmissivity * 1000 (1.0

1000)
100 … 1100
Sensor offset -
200 … +200
Sensor gain
800 … 1200
Averaging time * 0.1s (1s

10)
0 …3000
Valley hold time * 0.1s (1s

10)
0 …3000
Peak hold time * 0.1s (1s

10)
0 …3000
Setpoint relay in °C /°F dev. range min.. max
Deadband
1 …99
Decay rate
0 …9999
Relay alarm output control normally open,
normally closed,
permanently open,
permanently closed.
Laser control off / on / flashing/ trigger
Panel lock locked / unlocked
Analog output mode Set output mode
0 … 20 mA / 4 … 20 mA
Bottom temperature of output Set bottom temperature of
analog output
0…9999°C /°F
Top temperature of output Set top temperature of analog
output
0…9999°C /°F
8.3.3.2. Profinet alarm behavior
Parameter Description Setting
Message diagnostics alarm
The diagnostics information of
pyrometer is not transferred to
the PROFINET IO controller message inactive