Fluke endurance series, Руководство пользователя

Страница: 40 / 102

Endurance® Series
Users Manual
28
F
E G
A
K B
C
D
H
J L
M
A
B
C
D
F E G
H
J
K
L
M
5.5.1.1. M16 12-Pin DIN Connector Signal Assignment
In case wiring/re-wiring a M16 12-socket DIN connector or a supplied accessory cable
connector, refer to the following illustration and table for the wiring layout.
Figure 14: M16 connector, the corresponding socket and the wire coding table
5.5.1.2. M12 4-Socket LAN/Ethernet Connector
The LAN/Ethernet connector on Endurance
®
-Series side is a M12 4-socket connector type, D-
coded, suited for industrial Ethernet with IP67 protection rate and a screw retention feature. Via
the LAN/Ethernet connector the Endurance
®
-Series device can also be powered as a PD
(Powered Device) by a PSE (Power Sourcing Equipment) in a PoE (Power over Ethernet)
mode. In such operation mode a PoE injector or a PoE switch is needed. Refer to PoE standard
IEEE 802.3af, mode A, 10/100 Mbit mixed DC & data.
Figure 15: M12 Socket (left) and the corresponding cable plug (right)
Pin Color Description
A Black* A
B White* B
C Grey* - mA In
D Purple* + mA In
E White/Drain Shield
F Yellow Trigger
G Orange Relay
H Blue Relay
J Green + mA Out
K Brown
– mA Out
L Black Power Ground
M Red + 24 VDC
Note: Twisted Pairs* A/B an A/B and C/D
Signal Pin RJ45 Pin M12-4
TD+ 1 1
TD- 2 3
RD+ 3 2
RD- 6 4