Fluke 1586A, Руководство пользователя

Страница: 68 / 140

1586A
Users Manual
3-22
Thermistor Channels
Refer to Table 3-7 to configure a thermistor channel. The R(T) polynomial type requires
polynomial coefficients to be entered. The thermistor characterization polynomial is as
follows:
15 . 273
1
+
=
t
x
3 2
3 2 1 0 x B x B x B B y
+ + + =
y R exp
=
Where t is the temperature in °C and R is the resistance in Ω . Any coefficients that are
not used must be set to 0.
Table 3-7. Thermistor Channel Setup
1
2
3
4
5
6
7
hcn010.eps
Item Function

Thermistor function selection.

Select the thermistor type. Types available: R(T), 2.252 k
Ω
, 5 k
Ω
, and 10 k
Ω
.

Set up the channel for a 2-wire measurement connection. See “Sense Input Configuration” on
page 3-6.

Input a custom alpha-numeric label to help identify the channel (optional).

Set an alarm for this channel (optional). See “HI and LO Channel Alarms” on page 3-31.

Apply Mx+B scaling to the measurement (optional). See “Mx+B Scaling” on page 3-30.

Load a thermistor from the Probe Library. See “Probe Library” on page 3-34.