Fluke 1560 Black Stack, Руководство пользователя

Страница: 79 / 187

Example command: CALC3:AVER2:DATA?
Example response: 0.00017
6.5.1.4 CALCulate[n]:AVERage[n][:STATe]?
This query command returns the state of the calculation. It is implemented for
compatibility. It always returns 1 since the statistical calculations cannot be dis-
abled with this instrument.
6.5.1.5 CALCulate[n]:AVERage[n]:TYPE?
This query command returns the type of the calculation for the given type num-
ber. The CALCulate suffix number is optional and if given is ignored as all
channels have the same statistical calculations. The AVERage suffix number
specifies the type of the statistical calculation. The response corresponding to
the type number is the character word shown in Table 5 under Keyword.
Example command: CALC:AVER2:TYPE?
Example response: SDEV
6.5.1.6 CONFigure[<channel>]
The CONF command is often used in multi-function instruments to set the
measurement function and input channels. The 1560 has only one measurement
function, temperature, but input channels can be selected using this command.
It causes the following actions:
•
Sets the measure mode to off (INITiate:CONTinuous OFF).
•
Sets the COUNT N number to 1.
•
Sets the DELAY time to 0.
•
Sets the primary input channel to the specified channel.
71
6 Digital Communications Interface
Commands
No: Type Keyword
1 average AVER
2 standard deviation SDEV
3 minimum MIN
4 maximum MAX
5 spread SPR
6 n N
Table 10 Statistical Calculation Types