6.5.9.2
*OPT?
This query command returns a list of installed modules. Modules are reported
by position, front to back for the eight positions. The module model number is
reported if a module is installed or 0 is returned otherwise. Numbers are sepa-
rated by commas. For example, if the 1560 is equipped with one 2560 SPRT
module in front and two 2566 Thermocouple Scanner modules, the following
example would have the given response.
Example command: *OPT?
Example response: 2560,2566,2566,0,0,0,0,0
6.5.9.3
*RST
This command sets the instrument operating parameters to defined conditions.
It is equivalent to using the
SYSTEM RESET
function in the
SYSTEM
soft-key menu. It has the following effects:
•
Sets the measure mode to off.
•
Sets the COUNT N number to 1.
•
Sets the measurement delay to 0.
•
Sets the primary channel to input channel 1.
•
Sets the scan channel list to include all channels.
•
Sets the scan mode to primary channel.
•
Sets input average to off.
•
Disables routing to all output channels by setting the positive input chan-
nel number to 0, the negative input channel number to 0, and the calcula-
tion type to temperature.
•
Sets printing to all printer interface devices to off.
•
Clears the statistical functions.
•
Sets units to C.
This command does not affect probe parameters and characterization coeffi-
cients, display setup, time, password options, module device setup or calibra-
tion parameters, or communications status registers.
Example command: *RST
6.5.9.4
SYSTem:DATE <year>,<month>,<day>
This command sets the date. It is equivalent to setting the date using the
TIME
function in the
SYSTEM
soft-key menu. The <year> parameter is a four-digit
number. The <month> parameter is a one or two-digit number from 1 to 12.
The <day> parameter is a one or two-digit number from 1 to 31.
Example command: SYST:DATE 1996,5,23
1560 Thermometer Readout
User’s Guide
100
Содержание 1560 Black Stack
Страница 1: ...1560 Black Stack Thermometer Readout User s Guide Rev 932001 Hart Scientific...
Страница 20: ...1560 Thermometer Readout User s Guide 8 Figure 2 System Diagram...
Страница 27: ...15 2 Introduction Data Processing Figure 5 Data Flow...
Страница 70: ...RESET SYSTEM PARAMETERS PRESS ENTER TO CONTINUE PRESS EXIT TO CANCEL 61 5 Soft Key Functions System Menu...
