6.5.3.8
ROUTe:SCAN:STATe <Boolean>
This command enables or disables input channel scanning. It is equivalent to
selecting between the PRIM CHAN and SCAN options with the
SCAN
MODE
function in the
INPUT
soft-key menu. A <Boolean> parameter value
of 1 or ON enables scanning. This also disables the alternate scan mode (see
Section 6.5.3.4 ) so that only the selected scan channels are measured. A value
of 0 or OFF disables scanning so that only the primary input channel is mea-
sured. The *RST command sets scanning to OFF.
Example command: ROUT:SCAN:STAT ON
6.5.3.9
ROUTe:SCAN:STATe?
This query command returns 1 if the scan state is ON and 0 otherwise.
Example command: ROUT:SCAN:STAT?
Example response: 0
1560 Thermometer Readout
User’s Guide
80
Содержание 1560 Black Stack
Страница 1: ...1560 Black Stack Thermometer Readout User s Guide Rev 932001 Hart Scientific...
Страница 20: ...1560 Thermometer Readout User s Guide 8 Figure 2 System Diagram...
Страница 27: ...15 2 Introduction Data Processing Figure 5 Data Flow...
Страница 70: ...RESET SYSTEM PARAMETERS PRESS ENTER TO CONTINUE PRESS EXIT TO CANCEL 61 5 Soft Key Functions System Menu...
