9 Measurement
9.2 Measurement settings
FLUXUS G801
2020-06-26, UMFLUXUS_G801V1-0EN
90
Selection of an output
• Select the output to be installed.
• Press ENTER.
The scroll list contains all available outputs of the transmitter:
– Current Ix (--)
– Binary Bx (--)
– Frequency Fx (--)
A tick (
) after a list item indicates that this output has already been installed.
• Select
yes
to install or reconfigure the output.
• Press ENTER.
• Select
no
to uninstall the output and to return to the previous menu item in order to select another output.
• Press ENTER.
Assignment of a measuring channel
• In the scroll list, select the measuring channel to be assigned to the output as the source channel.
• Press ENTER.
This display will not be indicated if the transmitter has only one measuring channel.
Assignment of a source item
A source item has to be assigned to each selected output.
• Select the physical quantity (source item) to be transmitted to the output by the source channel.
• Press ENTER.
If a binary output is configured, only the list items
Limit
and
Impuls
will be displayed.
The source items and their scroll lists are summarized in the following table.
Special Funct.\SYSTEM settings\Proc. outputs\Install Output
Special Funct.\SYSTEM settings\Proc. outputs\Enable I1
Special Funct.\SYSTEM settings\Proc. outputs\...\I1 Source chan.
Special Funct.\SYSTEM settings\Proc. outputs\...\Source item
