Fimer FMR-PVS-10-TL-SX, Руководство по эксплуатации продукта

Страница: 10 / 80

EN
10
2. Introduction and general information
2.1 Warranty and supply conditions
The warranty conditions (available on the official FIMER website) are considered to be valid if the Customer adheres to all indications
content in this manual; any condition deviating from those described herein must be expressly agreed in the purchase order.
NOTE –
D
FIMER declares that the equipment complies with the provisions of law currently in force in the country of installation and
has issued the corresponding declaration of conformity.
2.1.1 Not included in the supply conditions
FIMER will NOT be held liable for defects or malfunctions arising from:
• improper use of the equipment;
• deterioration resulting from transportation or particular environmental conditions;
• performing maintenance incorrectly or not at all;
• tampering or unsafe repairs;
• use or installation by unqualified persons.
FIMER is not responsible for disposal of the equipment, or part of it, which does not take place on the basis of the regulations and laws in
force in the country of installation.
ATTENTION –
A
FIMER accepts no liability for failure to comply with the instructions for a correct installation and will not be held
responsible for systems upstream or downstream of the equipment it has supplied.
FORBIDDEN –
J It is absolutely forbidden to modify the equipment. Any modification, manipulation, or alteration not expressly
agreed with the manufacturer, concerning either hardware or software, shall result in the immediate cancellation of the warranty.
NOTE –
D
The customer is fully responsible for any changes made to the system.
2.2 Scope and target audience
2.2.1 Purpose and document structure
This operating and maintenance manual is a useful guide that will enable you to work safely and carry out the operations necessary for
keeping the equipment in good working order.
ATTENTION –
A
If the equipment is used in a manner not specified in this manual, the protections and the certifications provided by
the equipment may be impaired with the consequent loss of warranty.
NOTE – D The language in which the document was originally written is ENGLISH; therefore, in the event of inconsistencies or doubts
please ask the manufacturer for the original document.
2.2.2 List of appendix documents
In addition to this product manual you can consult (and download) the product documentation by visiting www.fimer.com .
NOTE –
D
Some component’s information given in this manual is taken from the original supplier documents. Please refer to the
supplier websites for the complete and updated documentation.
NOTE – D In certain cases, there may be a need to separately document software functionality or attach supplementary
documentation to this manual which is intended for more qualified professionals.
2.2.3 Operator and maintenance personnel skills/prerequisites
ATTENTION –
A
Personnel in charge of using and maintaining the equipment must be skilled for the described tasks and must
reliably demonstrate their capacity to correctly interpret what is described in the manual.
ATTENTION –
A
For safety reasons, the installation must be performed by qualified installers and/or licensed electricians, with
experience in photovoltaic systems. Installation must be in accordance with the existing regulations in the country of installation and
any other local electrical codes. The local electrical utility (or authority having jurisdiction) must approve the equipment installation
before it is connected to the electrical grid.
ATTENTION – A The customer has civil liability for the qualification and mental or physical state of the personnel who interact with
the equipment. They must always use the personal protective equipment (PPE) required by the laws of the country of destination
and whatever provided by their employer.
FORBIDDEN –
J
Inverter operation and maintenance performed by personnel that is NOT qualified, is intoxicated, or on narcotics,
is strictly forbidden.