Fimer FMR-PVS-10-TL-SX, Руководство по эксплуатации продукта

Страница: 11 / 80

EN
11
2.3 Application area, general conditions
FIMER shall not be liable for any damages whatsoever that may result from incorrect or careless operations.
FORBIDDEN –
J
Please, do not use this equipment for any application not mentioned in the field of use.
2.3.1 Intended or allowed use
This equipment is an inverter designed for:
transforming a continuous electrical current (DC) supplied by a photovoltaic generator (PV)
in an alternating electrical current (AC) suitable for feeding power into the public distribution grid.
2.3.2 Limits in field of use
• This equipment can be used only with photovoltaic modules which have ground isolated input poles, unless there are accessories
installed that enable earthing of the inputs. In this case you must install an insulating transformer on the AC side of the system.
• Only a photovoltaic generator can be connected to the input of the inverter (do not connect batteries or other sources of power supply).
• This equipment can be only connected to the electricity grid in countries for which it has been certified/approved.
• The inverter cannot be connected to the DC side in parallel to other inverters.
• This equipment may only be used in compliance with all its technical characteristics.
2.3.3 Improper or prohibited use
FORBIDDEN –
J
It is forbidden to install the equipment in environments subject to particular conditions of flammability or in adverse
or disallowed environmental conditions, (temperature and humidity).
FORBIDDEN –
J
It is forbidden to use the equipment with safety devices which are faulty or disabled.
FORBIDDEN –
J
It is forbidden to use the equipment or parts of the equipment by linking it to other machines or equipment, unless
expressly provided for.
FORBIDDEN –
J
It is forbidden to modify operating parameters that are not accessible to the operator and/or parts of the equipment
to vary its performance or change its isolation.
FORBIDDEN – J It is forbidden to clean with corrosive products that could corrode parts of the equipment or generate electrostatic
charges.
FORBIDDEN –
J
It is forbidden to use or install the appliance or parts of it without having read and understood the contents of the
user and maintenance manual. The equipment MUST NOT be used by inexperienced staff, or even experienced staff if carrying out
operations on the equipment that fail to comply with the indications in this manual and enclosed documentation.
FORBIDDEN – J It is forbidden to place any heavy object, sit or stand up on the inverter.
FORBIDDEN –
J
It is forbidden to heat or dry rags and clothing on the parts in temperature. In addition to being hazardous, doing so
would compromise component ventilation and cooling.