Fimer FMR-PVS-10-TL-SX, Руководство по эксплуатации продукта

Страница: 31 / 80

EN
31
4.3.2 Lifting
LIFTING –
U Risk of injury due to the heavy weight of the equipment!
FIMER usually stores and protects individual components by suitable means to make their transport and subsequent handling easier.
Nonetheless, as a rule, it is necessary to turn to the experience of specialised staff to take charge of loading and unloading components.
The Inverter must be lifted using the 2 handles
(25)
(to be ordered separately) or alternatively using suitable lifting equipment.
ATTENTION – A The ropes and equipment used for lifting must be suitable for bearing the weight of the equipment.
ATTENTION –
A
In case of manual lifting the number of required operators necessary to lift the equipment must be in accordance to
local regulations relating lifting limits per operator.
ATTENTION – A Do not lift several units or parts of the equipment at the same time, unless otherwise indicated.
The handles (25) have to be mounted into the designated M8 threaded holes located on the enclosures.
If lifting with ropes, M8 eyebolts can be mounted in the same holes.
It is required to use one of the following lifting methods to move the equipment during installation or maintenance phases:
ATTENTION – A Always consider the center of gravity of the enclosures while lifting.
ATTENTION – A Always completely tight the thread of the handles or eye-bolt before lifting.
Vertical lifting
(handles)
Vertical lifting
(eyebolts and lifting balancer)
Horizontal lifting
(handles)
ATTENTION –
A
DO NOT grab the equipment from the rear flange! Risk of injury due to cutting surfaces and risk of equipment
damage. Always use proper lifting equipment!