Festo 03-FB-8 Series, Электронное руководство

Страница: 31 / 127

PLEASE NOTE
Treat all the modules and the components of
the valve terminal with great care. Pay
special attention to the following:
•
Screw connections must not be distorted or
subjected to mechanical stress.
•
The screws must fit correctly
(otherwise the threads will be damaged).
•
The specified torques must be observed.
•
The modules must be aligned correctly
(IP 65).
•
The connecting surfaces must be clean
(avoid leaks and faulty contacts).
•
The contacts of the MIDI valve solenoid coils
must not be bent (they are not protected
against bending, i.e. they will break
off when bent backwards).
Please observe also the fitting instructions in
the packet in the case of modules which are
ordered at a later stage.
Input/output modules
Before the valve terminal can be extended or
converted, it must be dismantled.
Dismantling (see also following diagram):
•
Remove completely the screws of the rele-
vant modules. The modules are now held
together only by the electric plug.
•
Pull the modules carefully and without tipping
away from the electric plug connections.
•
Replace broken or damaged seals.
VIFB8 - 03/05 2. Fitting
2-4
9809c