Festo 03-FB-8 Series, Электронное руководство, Страница: 40 / 127

Fasten the terminal as follows
•
with 3 M10 screws on the adapter plate and
the right-hand end plate (2)
•
with 2 M6 screws on the left-hand end plate (1)
If necessary use additional fastenings as follows:
•
the fastening hole on the back of the
right-hand end plate with M10 thread ("blind
hole" (3))
•
the supporting brackets for I/O modules (see
fitting instructions supplied with the brackets)
The ISO valve terminal can be fitted as desired.
Use washers if necessary and use the M8 thread
for lifting eye bolt (e.g. for safe transport).
M10
3
M8 thread for
lifting eye bolt
2 1
M6
Fig. 2/6: Wall fitting of an ISO valve terminal type 05
VIFB8 - 03/05 2. Fitting
9809c
2-13