Federal APD PosiDRIVE Скачать руководство пользователя | Manualshive

Страница: 4 / 96

background image

Warranty Information

Federal APD, Inc. warrants that the Products will be free from any defects in material and work-
manship under normal use and service, wear and tear excepted, for a period of two years from the
date of shipment from Federal APD. Exceptions to this warranty may include any products and/or
accessories that are used with Federal APD equipment but are not manufactured by Federal APD
Inc. In those instances where Federal APD is not the manufacturer of goods sold hereunder, Fed-
eral APD's warranty shall be the lesser of such manufacturers' warranty, or Federal APD's standard
warranty.

This warranty shall not apply to Products which have not been properly maintained or have been
subjected to misuse, neglect, accident or damage, or which have been modified, changed, or
reworked in any way, without prior written approval of Federal APD. Federal APD's sole obliga-
tion shall be to repair or replace, at Federal APD's option, any defective part or parts within such
two year period. Upon Federal APD's written instructions, allegedly defective goods shall be
returned to Federal APD for inspection. This warranty extends only to the original purchaser from
Distributor/Dealer and shall not cover repair, labor, or replacement of parts that are by nature
expendable. Distributor/Dealer agrees to deliver the Federal APD Limited Warranty then in effect
to each of its customers at the time of the sale. Distributor/Dealer shall have no authority to bind
Federal APD to any warranty beyond that extended therein. All Products are subject to design and/
or appearance modifications which are production standards at the time of shipment. Federal APD
may, but shall not be required to, modify or update Products shipped prior to a current production
standard.

THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL FEDERAL APD BE LIABLE FOR
ANY LOSS OF PROFITS OR ANY INDIRECT OR CONSEQUENTIAL DAMAGES ARISING
OUT OF FEDERAL APD'S BREACH OF THIS WARRANTY OR ANY OTHER TERM OR
CONDITION OF THIS AGREEMENT.

«
...
2
3
4
5
6
...
»

Содержание PosiDRIVE

































































































Отзывы:

Нет отзывов

Похожие инструкции для PosiDRIVE

Бренд: CAME Страницы: 108

Бренд: BFT Страницы: 14

PowerDrive LW3000

Бренд: Chamberlain Страницы: 44

Бренд: GDS Страницы: 28

Бренд: RIB Страницы: 48

Бренд: vds Страницы: 33

Gold400A Series

Бренд: V2 Страницы: 76

Бренд: Rival Страницы: 4

GLIDEROL Glidermatic GTS+ Optima

Бренд: Glide Страницы: 2

Бренд: V2 Страницы: 15

Бренд: Smart Openers Страницы: 12

SMART ROLLER DUO

Бренд: Smart Openers Страницы: 16

Бренд: Beninca Страницы: 48

Excelerator 3531835447

Бренд: Genie Страницы: 32

Бренд: Genie Страницы: 33

Бренд: Omker Страницы: 9

Бренд: CAB Страницы: 60

Бренд: e-ast Страницы: 118

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды