Federal APD PosiDRIVE, Инструкция по установке, эксплуатации и обслуживанию

Страница: 10 / 96

2 • PosiDRIVE Security Gate Operational Overview ZMA-330, Ver.6 PosiDRIVE Security Gate
PosiDRIVE Security Gate Operational Overview
The PosiDRIVE Security Gate is a low-maintenance security gate, with a
microprocessor-based controller that protects roadways up to 20 feet (6 m). The
PosiDRIVE gate has a variable operating time, from 1.5 to 6 seconds, depending on the
length of the gate arm. The gate is capable of operating in an ambient temperature of
-30°F (-34°C) to 140°F (60°C) without any adjustments. It can be configured as a right-
hand or left-hand flange gate without any additional hardware.
The PosiDRIVE Security Gate works with several types of vend devices, such as vehicle
detection loops, card reading devices, or ticket issuing devices. The gate controller
inputs support both manual and automatic operation.
Manual Operation
For manual operation a toggle switch is wired into the Raise/Lower input on the gate
controller (Figure 2.3, on page 24). When the toggle switch is placed in the “raise”
position (i.e., the circuit is completed), the gate arm raises and remains in the up position
until the toggle switch is moved to the “lower” position.
Automatic Operation
For automatic operation, one or more vend devices are wired into the Vend input on the
gate controller (Figure 2.3, on page 24). Depending on the vend device(s), the lane runs
in one of the following modes:
■
“Free Mode” on page 3
■
“Pay Mode” on page 4
■
“Pay/Free Mode” on page 5
For all automatic operation modes, a vehicle detection loop that resides under the gate
arm (loop B) is wired into the
B Presence input on the gate controller. The gate
automatically lowers when the patron pulls off of the loop B.